What 30MS Option Body Parts Arm Parts & Leg Parts S (Color C) Offers
The 30 Minutes Sisters (30MS) line from Bandai is built for customization. The Option Body Parts Arm Parts & Leg Parts S (Color C) set gives you separate arm and leg assemblies that you can swap onto your 30MS figures. This lets you change proportions, add mechanical detail, or create a completely different silhouette without buying a whole new kit.
These parts are designed to work with standard 30MS bodies. The "Color C" variant means the plastic is molded in a specific pre-colored shade, so you can use them straight off the sprue or paint them to match your custom scheme.
How to Swap Arm and Leg Parts on a 30MS Figure
Swapping limbs on a 30MS figure is straightforward. The joints use standard pegs and sockets, so you can mix and match between different Option Body Parts sets.
- Remove the original arm or leg: Gently pull the limb away from the torso. The peg should slide out without excessive force. If it feels tight, wiggle it slightly while pulling.
- Attach the new Option Body Part: Line up the peg on the new arm or leg with the socket on the torso. Push firmly until you hear a click or feel it seat fully. The joint should move freely but not wobble.
- Check articulation: Rotate the shoulder or hip joint through its full range. If the part binds, make sure the peg is fully inserted and not angled.
- Paint or detail as desired: Since the parts are molded in color, you can leave them as-is. If you plan to paint, lightly sand the surface with 600–800 grit sandpaper to help primer adhere. Use acrylic or lacquer model paints. Let each coat dry fully before handling.
Key Catalog Facts for the Arm Parts & Leg Parts S (Color C)
- [Pre-order, ETA 2026 Q4 / 2027 Q1] 30 Minutes Sisters (30MS) Option Body Parts Arm Parts & Leg Parts S (Color C): This is a pre-order item estimated to arrive in Q4 2026 to Q1 2027. If you need these parts for a current project, you may want to order early. The first release may have limited stock, and later restocks could take additional time.
![[Pre-order, ETA 2026 Q4 / 2027 Q1] 30 Minutes Sisters (30MS) Option Body Parts Arm Parts & Leg Parts S (Color C)](/uploads/sites/2536/import-1787537850134-145797883.png)
[Pre-order, ETA 2026 Q4 / 2027 Q1] 30 Minutes Sisters (30MS) Option Body Parts Arm Parts & Leg Parts S (Color C) - [Pre-order, ETA 2026 Q4 / 2027 Q1] 30 Minutes Sisters (30MS) Option Body Parts Arm Parts & Leg Parts S (Color C): The first release of this item may be limited, and it may not be possible to fill all orders at the time of its initial release. To improve your chances of getting a piece from the first shipment, place your order as soon as possible. Unfilled orders will be filled by subsequent restocks.
- [Pre-order, ETA 2026 Q4 / 2027 Q1] 30 Minutes Sisters (30MS) Option Body Parts Arm Parts & Leg Parts S (Color C): The product is manufactured by Bandai and is part of the 30 Minutes Sisters line. Bandai's 30MS system uses standardized joints, so these parts are compatible with the vast majority of 30MS figures and many other Bandai model kits.
What the Supplied Information Does Not Cover
The catalog does not include specific assembly instructions, paint recommendations, or detailed compatibility lists beyond the 30MS line. For painting, use standard model painting practices: prime with a plastic-compatible primer, apply thin coats, and seal with a clear coat. If you are unsure about fit with a particular 30MS figure, compare the peg size visually before forcing the joint.
Because this is a pre-order item, exact shipping dates may shift. The ETA range (Q4 2026 to Q1 2027) is an estimate and may be subject to delays outside the store's control.


![[Pre-ordine, arrivo previsto Q4 2026 / Q1 2027] 30 Minutes Sisters (30MS) Parti Opzionali per Braccia e Gambe S (Colore C)](https://argamahobbycr.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F2536%2Fimport-1787537850134-145797883.png&w=800&q=86)