Retour au blog
Guides pratiques 2026-11-20 Argama Hobby - Gundam Model Kits & a Pro Build Space for ... 0 vues

Customizing 30MS Arm and Leg Parts: A Build Guide

Customizing 30MS Arm and Leg Parts: A Build Guide

Learn how to use Bandai's 30MS Option Body Parts for arm and leg customization. Practical tips for swapping and painting these model kit parts.

What 30MS Option Body Parts Arm Parts & Leg Parts S (Color C) Offers

The 30 Minutes Sisters (30MS) line from Bandai is built for customization. The Option Body Parts Arm Parts & Leg Parts S (Color C) set gives you separate arm and leg assemblies that you can swap onto your 30MS figures. This lets you change proportions, add mechanical detail, or create a completely different silhouette without buying a whole new kit.

These parts are designed to work with standard 30MS bodies. The "Color C" variant means the plastic is molded in a specific pre-colored shade, so you can use them straight off the sprue or paint them to match your custom scheme.

How to Swap Arm and Leg Parts on a 30MS Figure

Swapping limbs on a 30MS figure is straightforward. The joints use standard pegs and sockets, so you can mix and match between different Option Body Parts sets.

  1. Remove the original arm or leg: Gently pull the limb away from the torso. The peg should slide out without excessive force. If it feels tight, wiggle it slightly while pulling.
  2. Attach the new Option Body Part: Line up the peg on the new arm or leg with the socket on the torso. Push firmly until you hear a click or feel it seat fully. The joint should move freely but not wobble.
  3. Check articulation: Rotate the shoulder or hip joint through its full range. If the part binds, make sure the peg is fully inserted and not angled.
  4. Paint or detail as desired: Since the parts are molded in color, you can leave them as-is. If you plan to paint, lightly sand the surface with 600–800 grit sandpaper to help primer adhere. Use acrylic or lacquer model paints. Let each coat dry fully before handling.

Key Catalog Facts for the Arm Parts & Leg Parts S (Color C)

What the Supplied Information Does Not Cover

The catalog does not include specific assembly instructions, paint recommendations, or detailed compatibility lists beyond the 30MS line. For painting, use standard model painting practices: prime with a plastic-compatible primer, apply thin coats, and seal with a clear coat. If you are unsure about fit with a particular 30MS figure, compare the peg size visually before forcing the joint.

Because this is a pre-order item, exact shipping dates may shift. The ETA range (Q4 2026 to Q1 2027) is an estimate and may be subject to delays outside the store's control.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil