Back to Blog
How-to Guides 2026-10-22 Argama Hobby - Gundam Model Kits & a Pro Build Space for ... 1 views

How to Use Born Mirror Acrylic Paint for Chrome Finishes

How to Use Born Mirror Acrylic Paint for Chrome Finishes

Learn how to achieve a realistic chrome finish on your scale models using Born Mirror acrylic paint. This guide covers preparation, airbrush technique, and topcoat tips.

Quick Answer

Born Mirror acrylic paint delivers a high-reflectivity chrome finish when applied with an airbrush over a glossy black base and sealed with a low-erosion topcoat.

Why a Glossy Black Base Is Essential

Born Mirror paint is transparent and relies on a reflective underlayer to achieve its mirror-like effect. A glossy black base gives the paint a uniform surface to reflect light, producing a true chrome look rather than a dull silver. Without it, the finish will appear hazy or uneven.

Topcoat Requirements

The Born Mirror paint film is prone to discoloration from oxidation, so a protective topcoat is necessary. Use a low-erosion clear coat to avoid damaging the reflective layer. Standard solvents can cloud or dull the chrome effect.

Step-by-Step Chrome Painting Process

  1. Prepare the Surface: Sand the model part smooth and apply a primer. Then spray a glossy black base coat and let it cure fully. A rough or matte base will kill the reflectivity. Check that the black base is glossy and free of dust before moving on.
  2. Load the Airbrush: Pour Born Mirror paint directly into the airbrush cup. Do not add thinner or water. Use a 0.3–0.5 mm nozzle at 15–20 psi. Shake the bottle well before use. A common mistake is thinning the paint — it cannot be diluted and will lose its mirror effect.
  3. Apply Thin, Even Coats: Spray from 10–15 cm away in light, overlapping passes. Apply 2–3 thin coats, waiting 2–3 minutes between each. Avoid heavy wet coats that cause pooling or runs. If the finish looks grainy, you sprayed too dry or too far; if it runs, you applied too much at once.
  4. Let the Paint Cure: Allow the paint to dry for at least 24 hours in a dust-free area. The reflective layer is fragile until fully cured. Do not handle the part or apply topcoat too soon — the paint film is sensitive to oxidation and fingerprints.
  5. Apply a Low-Erosion Topcoat: Spray a clear topcoat formulated for low erosion, such as a water-based acrylic clear. Use light, mist coats to avoid dissolving the mirror layer. Using a standard solvent-based clear will cloud the chrome finish — always test on a scrap piece first.

Product Facts

  • Born Paint 007 - Born Mirror 30mL: High color rendering and high reflectivity for an easy plating-like finish. Cannot be diluted. You must use it straight from the bottle; thinning will ruin the reflective properties and cause an uneven coat.
    Born Paint 007 - Born Mirror 30mL
    Born Paint 007 - Born Mirror 30mL

Related Articles

Customer Service
Home
Products
Cart
Profile