Why small parts need a dedicated holder
Tiny model parts—think lenses, thrusters, or delicate detail pieces—are difficult to hold steady while painting. Fingers get in the way, and the part can slip or rotate unexpectedly. The Hobby Base Easy-to-Hold Paint Stick, Adhesive Type, Vertical (PPC-N29) is designed for exactly this situation: a vertical stick that lets you attach a small part to the top surface and paint while rotating it.
This guide explains how the PPC-N29 works, what you get in the pack, and how to use it effectively for holding small parts while painting.
What the PPC-N29 paint stick includes
- Hobby Base Easy-to-Hold Paint Stick, Adhesive Type, Veritcal (PPC-N29): Painting stick (adhesive type) vertical x 10 pieces You get ten sticks, so you can keep multiple small parts mounted and ready for painting without stopping to re-tape.

Hobby Base Easy-to-Hold Paint Stick, Adhesive Type, Veritcal (PPC-N29) - Hobby Base Easy-to-Hold Paint Stick, Adhesive Type, Veritcal (PPC-N29): Double-sided tape [5 x 5mm] 40 pieces The included tape squares are sized for small parts, giving you a secure hold without excess adhesive.
- Hobby Base Easy-to-Hold Paint Stick, Adhesive Type, Veritcal (PPC-N29): Total length 148mm; wooden part 138mm / metal part 20mm The 148mm length gives you a comfortable handle while keeping your fingers away from the painted area.
- Hobby Base Easy-to-Hold Paint Stick, Adhesive Type, Veritcal (PPC-N29): Handle uses the same 5mm thickness as previous painting sticks The 5mm thickness is designed to make rotation easy between your fingers, so you can turn the part smoothly while painting.
How to use the adhesive paint stick
The PPC-N29 is straightforward to use. Follow these steps for a steady painting experience.
- Attach a piece of double-sided tape to the top of the stick: Use one of the included 5 x 5mm tape squares. Press it firmly onto the top surface of the painting stick.
- Mount your small part onto the tape: Place the part on the exposed adhesive side. The large painting base, long painting base, or regular painting base (each sold separately) can help secure the part if needed, but the adhesive alone may suffice for lightweight parts.
- Rotate the stick while painting: Hold the 5mm handle and turn it between your fingers to reach all sides of the part. The stick is designed not to wobble, and parts won't touch each other if you mount multiple sticks in a stand.
- Remove the part when done: Gently peel the part off the tape. If tape residue remains, clean it according to your paint and model material guidelines.
Practical tips for holding small parts steady
These suggestions help you get the most from the PPC-N29 and similar adhesive paint sticks.
- Use the right amount of tape: The 5 x 5mm squares are pre-cut for small parts. For very tiny parts, you can trim a square down, but avoid using too little tape or the part may slip.
- Keep the stick vertical: The vertical design keeps the part upright, which is ideal for painting from above or rotating to reach sides. Avoid laying the stick down while the paint is wet.
- Consider a painting base for extra security: If your part is larger or oddly shaped, the separately sold large, long, or regular painting bases can provide additional support. The catalog notes these are sold separately.
- Label your sticks: With ten sticks in the pack, you can dedicate each to a specific part or color. A small label on the wooden handle helps you keep track.
What the supplied information does not cover
The catalog does not specify a maximum part weight or size for the adhesive tape, nor does it include instructions for cleaning residue or compatibility with specific paints. Use your judgment and test on a spare part if you are unsure. Always follow the paint manufacturer's directions for drying times and safety.


