Start with what the Altezza kit actually gives you
The Fujimi Inch-Up Series ID-330 is a 1/24 Toyota Altezza RS200 that comes back with aero parts included. The box adds a rear wing and side spoiler parts, so the build is not just a stock sedan body — you are committing to a winged, aero-equipped look from the start.
That matters for planning. Before you cut anything, decide whether you are building the full aero version or leaving parts off, because the rear wing and side spoilers change how the body reads and where you will spend your finishing time. The kit also reproduces the wheels, mirrors, muffler, headlights, and front grille in a chrome-like molded color, and the decal sheet covers logos, license plates, and gauges.
Kit details that shape your build order
- 1/24 Toyota Altezza RS200 w/ GT W Wing (Fujimi Inch-up Series ID-330): Includes rear wing and side spoiler parts. The aero parts are separate pieces, so you can dry-fit and paint them before final attachment instead of gluing them onto a finished body.

1/24 Toyota Altezza RS200 w/ GT W Wing (Fujimi Inch-up Series ID-330) - 1/24 Toyota Altezza RS200 w/ GT W Wing (Fujimi Inch-up Series ID-330): Wheels, mirrors, muffler, headlights, and front grille are reproduced in a chrome-like molded color. These parts already have a bright finish out of the box, so you can leave them unpainted or strip and refinish them — but you should decide before assembly.
- 1/24 Toyota Altezza RS200 w/ GT W Wing (Fujimi Inch-up Series ID-330): Decals include logos, license plates, and gauges. Plan your clear coat and decal stages around these markings, especially the gauge decals that go on after the interior is painted.
A practical build sequence for the winged Altezza
Treat the aero parts and chrome-molded trim as separate sub-assemblies so you are not handling a finished body while fitting small pieces.
- 1. Dry-fit the rear wing and side spoilers: Test the mounting points on the body before any paint. Confirm how the wing sits and whether the side spoilers need cleanup on their mating surfaces.
- 2. Decide the finish for the chrome-molded parts: The wheels, mirrors, muffler, headlights, and front grille come in a chrome-like molded color. If you want a different look, strip or prime these parts before assembly rather than trying to paint over the bright finish later.
- 3. Build and paint the body shell: Keep the body separate from the aero parts while you paint and clear coat. This avoids masking around the wing and spoilers and keeps the finish even.
- 4. Paint the aero parts to match or contrast: The rear wing and side spoilers can be body color or a contrasting finish. Paint them as separate pieces so the edges stay clean.
- 5. Apply decals after the body finish is done: Logos, license plates, and gauges are supplied as decals. Place the body logos after clear coat, and add the gauge decals once the interior is painted and assembled.
- 6. Attach the aero parts last: Fit the rear wing and side spoilers after the body is painted and decaled, so you are not handling a finished shell while aligning small parts.
Where to focus your paint work on this kit
The Altezza RS200 is a sedan body with a lot of visible surface, so a smooth, even base coat does more for the final look than heavy detailing. The aero parts add edges and shadow lines, which means light, consistent coats on the wing and spoilers will read better than thick coverage that softens the shapes.
The chrome-like molded parts are the main fork in the road. Leaving them as supplied gives you a bright, out-of-box look with no paint work. Refinishing them — for example, with a different metallic or a satin finish — gives you more control but adds prep time. Either way, decide before you start assembly, because these parts are much easier to handle while they are still on the sprue.
For the decals, work in the order the kit presents them: body logos and license plates on the painted shell, gauge decals on the interior. Keep the gauge decals until the dashboard is painted, since they are small and easy to lose during handling.
Checkpoints before you commit to glue
- Aero parts fit: Dry-fit the rear wing and side spoilers on the unpainted body and check that the mounting surfaces meet cleanly. The supplied information lists these parts but does not describe the mounting method, so confirm the fit yourself before painting.
- Chrome-molded finish decision: Confirm whether you are keeping the chrome-like molded color on the wheels, mirrors, muffler, headlights, and front grille or refinishing them. Once assembled, changing your mind means disassembly.
- Decal placement: Plan where the logos, license plates, and gauges go before you clear coat the body, so you leave those areas clean.
- Interior timing: Paint and assemble the interior before attaching the body shell, so the gauge decals and dashboard work are not done through a narrow opening.
What the supplied information does not settle
The catalog record for this kit does not include paint codes, glue type, or a recommended assembly order, and it does not list an age range or safety warnings. Treat the sequence above as a practical planning framework rather than a manufacturer instruction, and check the kit's own manual for the official build order and any finishing guidance.
If you are choosing between this and another 1/24 kit, the Altezza's appeal is the included aero package and the chrome-molded trim that lets you skip some detail painting. If you want a stock, wing-free build, this particular release pushes you toward the winged look — the rear wing and side spoiler parts are part of the package.


